| MODEL |
TD102 |
| Cutter Bar |
|
| Cutting width |
10 ft. 4 in. (3.16 m) |
| Cutting height |
0.95 - 3.2 in. (24 - 81 mm) |
| Cutting height w/opt. high-stubble shoes |
2.25 - 4.5 in. (58 - 115 mm) |
| Type cutterbar |
Modular |
| Number of discs/knives per disc |
2-Aug |
| Disc speed @ rated PTO speed |
2835 rpm |
| Cutter bar shear protection |
Standard – Frangible splines in disc drive hub |
| Cutter bar flotation |
Vertical and lateral, adjustable springs |
| Swath width |
95 in. (2.4 m) |
| Driveline |
|
| Input speed |
540 rpm |
| Driveline protection |
Slip clutch and overrunning clutch assembly @ rear of PTO shaft |
| Tractor Requirements |
|
| Minimum PTO power required |
60 hp (45 kW) |
| PTO Splines/Diameter |
6-Splines/1-3/8 in. (35 mm) |
| Hydraulic circuits required |
2 |
| Minimum relief pressure required |
1500 psi (103 bar) |
| Drawbar requirements – ASAE |
ASAE Category II drawbar |
| Tires |
|
| Tubeless Ag rib implement tires |
27x9.5-15 6PR |
| Max. transport speed |
20 mph (32.2 kph) |
| Dimensions and Weight |
|
| Transport width |
10 ft. 10 in. (3.3 m) |
| Operating width |
16 ft. 4 in. (4.9 m) |
| Transport length |
15 ft. 8 in. (4.8 m) |
| Operating length |
15 ft. 3 in. (4.6 m) |
| Transport height |
62 in. (1.6 m) |
| Operating height |
62 in. (1.6 m) |
| Ground clearance w/header fully raised |
11 in. (279 mm) |
| Shipping weight |
3,035 lbs. (1379 kg) |
| Operating weight |
2,610 lbs. (1186 kg) |
